Royce Burnett's Journal
Home Page: Royce Burnett
Miami, MB, Canada
| Total Posts: 38 | Latest Post: 2016-02-28 |
| Table of Contents | RSS Feed |
Well as one can see by the pictures the journey continues... we've begun fixing the PS trumpet area and things sort of extended from there.
On a different area, I've got the repair panel almost ready to go in on the PS dogleg, took a bunch of messing around and more to come to get the panel to fit correctly.. it's not bent properly at the bottom edge as it turns out. I'll have to cut it just below the body curve where it turns north towards the membrane and splice a small strip in. Actually I think it is the fault of the Steelcraft rocker panel, I noticed after I had everything welded up that the bottom side is deeper than the rocker on the driver's side ( approx 1/4 inch difference in the depth). This is about how much I'm going to have to splice into the dogleg patch.
On a different area, I've got the repair panel almost ready to go in on the PS dogleg, took a bunch of messing around and more to come to get the panel to fit correctly.. it's not bent properly at the bottom edge as it turns out. I'll have to cut it just below the body curve where it turns north towards the membrane and splice a small strip in. Actually I think it is the fault of the Steelcraft rocker panel, I noticed after I had everything welded up that the bottom side is deeper than the rocker on the driver's side ( approx 1/4 inch difference in the depth). This is about how much I'm going to have to splice into the dogleg patch.
oh boy
oh boy oh boy
grr
No comments have been posted yet...
Want to leave a comment or ask the owner a question?
Sign in or register a new account — it's free